How to Delete a Sensor from a Project
Here are the steps to delete or remove a sensor from a Project:
1) Open your Project in HardTrack Desktop
2) highlight the sensor(s) that you want to delete by single-clicking them. If you hold down the Ctrl-key, you can highlight more than one at a time. If you hold down the shit-key, you can highlight a range of sensors to delete.
3) click Sensor, Delete Sensor
4) Click Yes
If you made a mistake, click Project Refresh and the deleted sensor will reappear.
5) Click Project, Save.
If you make a mistake and Save the Project with the wrong Sensor Deleted, do not worry.
You can add the sensor back later, by adding the same Device to your project again.
This will add all missing sensors for that Device to your project. Then start logging again and you will see your data return to your project.
Helpful Links
Related Articles
How to Add a Sensor Back to a Project that has been Deleted
If you want to add a Sensor back to a Project, these are the steps to follow: 1) Open your Project in HardTrack Desktop 2) Add the Device that contains the Sensor to your Project. By adding a Device to your Project that is already added to your ...How to Switch a Single Sensor on a Project to a Backup Sensor
An ideal way to set up concrete temperature monitoring with HardTrack, is to attach your backup sensors to the HardTrack Cloud (HTC) Device so that if you need to switch from the primary to the backup sensor, you can do so remotely without any ...How to Set up a Temperature Monitoring Project in HardTrack Desktop using HardTrack Cloud Sensors - (HTC)
How to Setup a Temperature Monitoring Project in HardTrack Desktop using Cloud Sensors Before you begin: Please follow the instructions provided to install HardTrack on your PC. After you have successfully installed HardTrack on your PC, please ...How to Share a HardTrack Cloud Device with Multiple Concrete Pours, with Different Pour Dates and Times
These are the steps to follow to set up multiple HardTrack Projects, sharing a single HardTrack Cloud device: Note the Ambient Sensor, NWS Average Ambient Sensor, and Device Internal Sensor are shared among all of the projects that are sharing the ...How to Add Sensors Back to a Project so that they are Included in your Final Report
In some cases, it is necessary to delete sensors from a HardTrack Project. However, when the Final Temperature Report needs to be generated, you may want to add the Sensors back to your project so that they are included in the Final Report along ...