How to set time zone, date & time and Taskbar settings for HardTrack Mobile on the Handheld

How to set time zone, date & time and Taskbar settings for HardTrack Mobile on the Handheld



On the handheld device, please do the following:

Click on Settings, Control Panel:



Click in Date & Time:



Select your Time Zone and check the Automatically adjust clock for daylight savings if it applies: 



You can click directly into the Year and type in the current year, rather than using the up and down arrow:



Set the Month:



Click on the day of the month and click apply:



Close the Settings Window and Click on Settings, Taskbar:



These are the recommended selections, that will cause you system Taskbar to display the items that you will want available to you for display and selection:






    • Related Articles

    • HardTrack Mobile User Manual

        HardTrack Mobile User Manual Revision 5.1 April 21, 2021 For further information or assistance, call WAKE's Customer Service Hotline Toll-Free at US (800) 957-5606 or CA: (647) 931-6995 Wake, Inc. reserves the right to alter any of its products or ...

    • How to update HardTrack Mobile on a Handheld Device to a new version using HardTrack Desktop

      How to update HardTrack Mobile on a Handheld Device to a new version 1) Update your HardTrack Desktop application 2) Place your Mobile Device in the Docking Station and attach the USB cable so that the Mobile Device can communicate with your PC which ...

    • How to get Device Mirror working between HardTrack Desktop and HardTrack Mobile running on a Handheld Computer

      After following the instructions in the HardTrack users manual, you cannot get Device Mirror to run correctly on your PC, this article may assist you in resolving the issue. Device Mirror will need to be initially installed. This is usually taken ...

    • How to Change the Pour Date & Time for a HardTrack Project

      It is not uncommon to start a HardTrack Project a day or more before the actual Pour Date & Time.  This is usually done to either get the equipment set up and working and/or to see that temperature readings are appearing on HardTrack after the ...

    • How to Reset the Handheld Device

      To perform a warm reset: • Press the FN/BLUE key and the ENTER key simultaneously for a few seconds. During a warm reset, running programs are halted. The contents of RAM, flash memory and the registry are preserved To perform a cold reset: If the ...